Phoenix locos are UK based international distributors of high quality, affordable battery electric model locos,
rolling stock and loco bogies in 5 inch and 7.25 inch gauge that are ideal as club locos or in garden railways.

The Geep Specification

Dimensions:

• Length over buffer-beams: 2146mm / 84.5in
• Width: 416mm / 16.4in
• Height: 612mm / 24.1in

Performance:

• Speed: 8-10 mph /14-17kph

Control system:

• Controller: iDrive 180amp 24v digital controller with onboard diagnostics
• Location: Power controller inside locomotive, remote handset on lead
• Handset: Rotary power, direction, dead-mans facility, optional auxiliary switches

Safety:

• Dead man's facility on handset
• Loco will stop if handset is unplugged or control lead is severed
• Mechanical handbrake actuates on disc and caliper on front bogie

Drive system:

• Motor located in both bogies with protective cover and air cooling.
• Chain drive to centre layshaft and from layshaft to both axles.

Electrical system:

• 24volts. 60 amp midi fuse. Battery isolation key switch
• All power wiring pre-cut and terminated
• Two Bosch 24v 750 watt 1 hp DC motors

Chassis:

• 3mm steel laser cut and cnc folded. With 6mm laser cut steel buffer beams

Bogies:

• Laser cut 6mm side frames and pivot plate.
• CNC machined EN8 steel wheels 143.7 mm dia.
• Axles and layshaft run in self aligning roller race bearings.
• Coil spring suspension. One Bosch 24v 1 hp DC motor in each bogie.
• Disc brake to front bogie

Body:

• Laser cut 1.6mm folded steel panels Bolt together assembly.
• Access door in nearside panel
• Seat panels are 3mm laser cut steel

Finish

• Chassis, chassis side cover plates and cab roof are powder coated in satin black, buffer beams in red or black
• Body panels can be finished to customer’s choice of colours from a range of powder coat finishes

Kit - components:-

• Chassis
• Chassis cover plates
• Cab and bonnet panels
• Panel and window trim
• Buffer beams
• Brackets
• Suspension units with self aligning bearings
• Wheels
• Axles
• Taper lock sprockets, chain, and motor-mounting bracket
• Motor cover, with air fans
• Two Bosch 1 hp DC motors
• Motor-drive sprockets
• iDrive 180 amp motor speed controller
• Remote handset
• Fuse holder and fuse
• All wiring
• Illustrated build manual
• Illustrated running and maintenance manual
• All fasteners

Loco is supplied as a bolt together kit with built and tested bogies and wiring loom

E&OE. Phoenix Locomotives Ltd reserves the right to change this specification at any time as part of the ongoing programme of model development 01.01.2013