Phoenix locos are UK based international distributors of high quality, affordable battery electric model locos,
rolling stock and loco bogies in 5 inch and 7.25 inch gauge that are ideal as club locos or in garden railways.

Find Phoenix Locos on Facebook Find Phoenix Locos on Twitter

Phoenix Locos

Beefy Auto Truck 10.25 Inch Specification

General dimensions
  • Length over buffers 53 in. / 1348mm
  • Height overall 34.4in / 875 mm
  • Width over body 23.6in / 600 mm
  • Wheelbase 20.47in / 520 mm
Weight
  • Weight (estimated): 595.25lbs / 270 kg
Performance
  • Speed - 10 mph / 14 kph (maximum)
Control system
  • iDrive 200amp 24 volt motor speed controller
  • Power controller inside locomotive
  • Controls located on bulkhead.
  • Spring return lever power control, toggle switches for forward reverse , speed limiter, controller isolation and lights.
  • Push button for horn.
  • Emergency stop button and battery master switch.
  • Accucharge LED display for battery condition
Drive system
  • Motors - 2x 24v 750 watt DC motors
Drive
  • Chain drive from motors to intermediate lay-shaft, chain drive to each axle.
Chassis
  • Construction 6mm laser cut steel bolt together.
Braking
Controller has regenerative braking.
  • Screw down brake, operating a brake caliper onto a disc fitted to rear axle.
Bonnet and superstructure
  • Mix of 3mm and 1.6mm laser cut steel, CNC folded. Blank panel on Auto truck radiator for vinyl graphic "Beefy" or customers choice of name.
Seat
  • Seat is Ferguson TE20 Tractor seat. The seat can be bolted in left, right or forward facing configuration (supplied in black).
Wheels
  • 157.16mm Diameter (6.18in) EN8
  • 40.48mm wide (1.59in)
  • CNC machined
Axles
  • 30mm diameter EN8 CNC machined steel
Couplings
  • Couplings are made with 20 laser cut 6mm steel plates.
Electrical system
  • Voltage/fuses - 24volt. 80 amp main fuse
  • Disconnects Controller isolation switch on bulkead
  • Emergency stop button
Wiring
  • Pre-formed and terminated wiring loom.
Finishing
  • All panels are powder coated. Couplings will require painting after assembly. Seat is finished in black.
  • Standard livery is green with a white radiator.
  • We can powder coat in most colours and an alternative livery with two colours of your own choice is a no-cost option.
  • Additional colours are available. (see options)
Kit – components

The following specification is for a standard 2 motor kit

  • Steel chassis and body components laser cut and CNC folded
  • All brackets
  • Wheels, axles, lay-shaft, sprockets, chain, bearings
  • Wiring loom assembled and fitted with motor controller, fuse and battery connections.
  • All wiring pre-cut and fully terminated.
  • Vinyl decals. "Beefy" or customers choice of name.
  • All fasteners (Primarily Stainless Steel) with a few BZP
  • Screw down brake components
  • Tractor seat with welded mounting post.
  • Ex-Nato ammunition box
  • All panels powder coated (couplings will require painting after assembly) Seat is supplied finished in black.
Options and extras
  • 4 Motor version with twin iDrives - £645.00
  • Front light - £20.00
  • Horn - £10.00
  • Ready to roll (2 motor) - £650.00
  • Ready to roll ( 4 motor) - £750.00
  • Extra powder coat colour - £30.00

E&OE Phoenix Locomotives Ltd reserve the right to amend this specification at any time. 01.05 2019

Random Images

 

Meta Information

5 inch Gauge
7.25 inch Gauge 3,995

All prices include VAT