Phoenix locos are UK based international distributors of high quality, affordable battery electric model locos,
rolling stock and loco bogies in 5 inch and 7.25 inch gauge that are ideal as club locos or in garden railways.

Scooter Specification

Dimensions

• Length over couplings: 1276mm / 50.25in
• Width over buffer beam: 570mm / 22.45in

Weight

• Weight: (estimated, less batteries) - 42kg estimated

Performance

• Speed - 5-10 mph
• Optional garden railway gearing - 3-6 mph

Control system

• iDrive 180 amp 24v digital motor speed controller with remote, plug in handset.
• Handset has rotary power control, dead-mans facility, switches for forward/reverse, horn or bell, and an auxiliary switch for accessories.
• Internal control panel has LED display for battery condition and on-board diagnostics and switches for limiting speed range and freewheel facility.

Safety

• Handset has a dead man’s facility
• Loco will stop if handset is unplugged or control lead is severed
• Battery cut out switch
• Disc brake and calliper with ratchet handle

Drive system

• Motor located on the chassis with chain drive to centre layshaft and from layshaft to both axles.
• Chain drive sprockets are taper lock for both axles and layshaft.
• Optional additional layshaft and gearing for lesser speed range.

Electrical system

• 24volts. Main fuse 60 amp midi.
• All power wiring pre-cut and terminated.

Construction

• Chassis - 3mm steel laser cut and cnc folded
• Buffer beams - Laser cut 6mm steel
• Wheels - CNC machined EN8 steel 143.7 mm dia.
• Back to back - 7¼” gauge 173mm
• Layshaft - 20mm steel runs in roller bearings
• Suspension - Outboard springs and self aligning ball bearings
• Couplings - 6mm steel with 10mm coupling pin
• Disc brake with mechanical calliper actuated by ratchet handle

Body

• 18mm exterior grade red faced plywood with fillets and fasteners supplied
• Padded seat

Finish

• Chassis, chassis side cover plates are powder coated in satin Black
• Buffer beams in Red, Yellow or Black
• Plywood panels are sawn to size

Kit - components

• Chassis
• Chassis cover plates
• Buffer beams
• Brackets
• Couplings
• Suspension units with self aligning bearings
• Handbrake with mounting bracket
• Disc brake with calliper
• Wheels and axles
• Taper lock sprockets
• Chain
• Motor-mounting bracket
• DC motor
• Motor-drive sprocket
• Motor speed controller
• Handset
• Fuse holder and fuse
• All wiring
• Illustrated instructions
• All fasteners Plywood body panels to make battery box and seat
• Options Low speed range gearing
• Ready to roll with bodywork painted in a colour of your choice

E&OE. Phoenix Locomotives Ltd. We reserve the right to change this specification at any time as part of the ongoing programme of model development 17.01.2013