Phoenix locos are UK based international distributors of high quality, affordable battery electric model locos,
rolling stock and loco bogies in 5 inch and 7.25 inch gauge that are ideal as club locos or in garden railways.

Find Phoenix Locos on Facebook Find Phoenix Locos on Twitter

Phoenix Locos

Titan Bogie Loco 7.25" Specification

  • Length over buffer-beams: 1512mm / 59.5in
  • Width: 416mm / 16.4in
  • Height: 612mm / 24.1in
  • Bogie Wheelbase: 360mm / 14.1in
  • Bogie pivot centre: 750mm / 29.52in
Weight (est.):
  • Weight (approx): 120KG (excluding batteries)
  • Speed: 8-10 mph / 14-17kph
Control system:
  • iDrive 180amp 24v motor speed controller
  • Remote control handset connected to loco by single cable and plug
  • Handset has on/off, speed, direction, horn and three auxiliary switches for accessories plus Led display for system and battery status.
  • Handset has a dead man’s facility via a jack plug and socket.
  • Loco will stop if handset is unplugged or control lead is severed.
Drive system:
  • Motor located in the bogie with protective cover and forced air cooling.
  • Chain drive to centre layshaft and from layshaft to both axles.
Electrical system:
  • 24volts. 100 amp midi fuse.
  • All power wiring pre-cut and terminated.
  • Two Bosch 24v 750 watt 1 hp DC motors.
  • 3mm steel laser cut and cnc folded. With 6mm laser cut steel buffer beams.
  • Laser cut 6mm side frames and pivot plate.
  • CNC machined EN8 steel wheels143.3 mm dia.
  • Axles and layshaft run in self aligning roller race bearings.
  • Coil spring suspension. One Bosch 24v 1 hp DC motor in each bogie.
  • Laser cut 1.6mm folded steel panels with apertures for windows and louvers, additional parts for radiator frame and side panels.
  • Bolt together assembly.
  • Stainless steel widow frames, glazing and fasteners
  • Chassis, chassis side cover plates and cab roof are powder coated in satin Black, buffer beams in Red and body panels can be finished to customer’s choice of colours from a range of powder coat finishes.
Kit - components:
  • Chassis
  • Chassis cover plates
  • Cab and bonnet panels
  • Buffer beams
  • Brackets
  • Suspension units with self aligning bearings
  • Wheels
  • Axles
  • Taper lock sprockets
  • Chain
  • motor-mounting bracket
  • Motor cover, with forced air fans
  • Two Bosch 1 hp DC motors
  • Motor-drive sprockets
  • Motor speed controller
  • Handset
  • Fuse holder and fuse
  • All wiring
  • Illustrated build manual
  • Illustrated running and maintenance manual
  • Stainless steel widow frames and glazing
  • All fasteners
  • Decal set

E&OE. Phoenix Locomotives Ltd reserves the right to change this specification at any time as part of the ongoing programme of model development. 4th April 2011

Random Images


Meta Information

5 inch Gauge See Info
7.25 inch Gauge See Info

All prices include VAT